The Strider was originally due to be named the Stroller, which is why you’ll still see that name on the prototype’s dial and case back here. A rose by any other name would smell as sweet, but seeing the two names side by side ‘Strider’ definitely feels more purposeful and confident. The final version will also see improved lume, but other than that the watch I’m looking at will be the same as the final one delivered.

If you have seen images of this watch, then you’ll no doubt de struck by the dial. All of the five colour dials (black as seen here, grey, blue, cream and green) feature the same prominent texture, which can either be referred to as Clous de Paris if you’re feeling fancy, or Hobnail if you’re not. I expect that the effect is just as striking on all models, but on the black dial I have had on my wrist the pattern almost looks like carbon fibre at times. The finishing of the dial, along with the hands and applied indices which sit on top, is excellent. Even under magnification it’s very difficult to find any imperfection or even notice a raised area for the logo and name to be printed.

However, it’s actually the case that caught my attention in images. The lugs remind me of my favourite Grand Seiko reference (the SBGX091 if you’re planning to sort your Christmas shopping early this year), but that’s not to suggest Audric had that shape in mind while designing the Strider, nor that everyone will see the similarity. Although I don’t expect the Audric to be finished to the same level as a Grand Seiko, it’s still quite impressive. In addition to the a large brushed area on top of the fixed bezel, the angled and vertical surrounding areas form a 12-sided shape with a high polish.

The complexity doesn’t end there. To come back to the lugs briefly, there are no less than five surfaces that form the transition from the top-most part of the lug to its tip, and those are created by a combination of both soft and crisp edge and a variety of finishes. In a world of complex geometry that all seems to come together harmoniously, the one angle that seems slightly out of place is at the crown. As the crown sits at the apex of two surfaces and isn’t recessed into the case, even when screwed down there is a slight gap either side. I’ve never damaged a crown or stem by getting it caught, so it’s only a minor nagging at the back of my mind.

Inside the Strider is a Swiss automatic movement. This could be either the ETA 2824-2 or the Sellita SW200-1, depending on what is available to Audric. Both movements have pretty much the same spec (which beat at a rate of 28,800 bph, with a power reserve of 38 hours). Whichever movement is in the watch will be in Elabore grade, with blued screws and a signed rotor.

Whereas many new releases fitting loosely into this “sports watch” category have often gravitated to a 39-40mm sweet spot, the Audric has a little more presence. At 42mm in diameter the Strider isn’t overly large, but if the slight trend for sub-40mm watches leaves you frustrated, then this could be a good option. Although weighty at first, I found the Strider very comfortable on the wrist. You’ll see that the underside of the lugs angle down sharply which probably helps a lot with how it wears. The bracelet is constructed and finished to the same high level as the case, with a signed push button clasp to match. Audric indicate that the watch has a HexaDori anti-scratch coating. I have no experience to know just how much this will help the watch to look pristine as it gets worn in daily life, but it can’t be a bad thing.

I have found the bracelet to be such a good match, both for looks and comfort, that I haven’t really considered other strap options. With the sculpted, angular lugs I suspect a right leather strap could work very well, but although the 11.5mm height hasn’t been an issue I suspect a nato or other pass-through strap might make it feel a little top-heavy.

The Audric Strider does a lot of things well. There’s some real beauty to the dial, and the case combines complexity with great finishing. My only reservations are whether Audric are potentially trying to do too much in a watch that could be worn for 95% of occasions. Is the dial too much of an eye-catcher? Are the case angles too complex? Is the case just a little too big? I haven’t quite made my mind up. The Strider will start at $549 when launched on Kickstarter, with a regular price of $849.

• 42mm case diameter
• 48mm lug to lug
• 11.5mm height
• 22mm lug width
• 200m water resistant
• ETA 2824-2 or Sellita SW200-1 movement
• Sapphire crystal with internal AR coating
• C3x1 Superluminova
• Screw down crown
• HexaDori anti-scratch coating

The post Audric Strider Watch Review appeared first on 12&60.

The bracelet fits to the case with reassuringly solid end links and the lug to lug is a sensible 22mm for a watch of this size. There is a slight taper to the bracelet running from the 22mm down to 20mm at the clasp. The clasp feels solid and also offers a diver ratchet extension system for micro-adjustments to ensure a perfect fit. If however, you do need to add or remove links these are secured with screws and not pins which gives a good solid feel to the bracelet and makes the process much easier I always think.

The case features a helium escape valve at the 9 o’clock position and has a mixture of finishes featured from fine brushing and polished chamfered edges. The sides of the case are nicely recessed with a polished edge and a darker satin finish in the recessed areas. The case is very angular. It reminds me somewhat of a Seiko Samurai but on a larger scale.

Crown guards are present and the crown is equally chunky with nice grip afforded by deep knurling. The crown as you would expect is screwed down to offer the 500m water resistance and has a nice smooth action with no stem wobble or issues.

The bezel is a 120 click unidirectional with again deep but spaced knurling to provide great grip when used it also features a lume filled AUDRIC logo. Zero back play and a nice click that locks into place meant this was a nice bezel to use! The case back is nicely etched with a sea turtle and contains the basic information we’re all used to seeing.

The star of the show for the SeaBorne though will undoubtedly be the dial on this one for most people. The dial sits under a piece of domed sapphire crystal with 5 layers of anti-reflective coating and sapphire is also used in the bezel insert as well. This gives the appearance of one almost seamless piece across the top of the face and bezel. The watch face itself is very finely patterned with a radiating sunburst effect and is also a sandwich-style for the minute markers which hold C3 Lume. The rest of the dial and also the bezel make use of BGW-9 lume giving all the visibility you could need! The dial indices are also Rhodium plated. This should mean that they resist corrosion better over the years but in the immediate term, this gives them a nice lustre. The chapter ring contains a minute marker track but also has a coloured third splint down further into red and yellow half’s. This adds a bit more colour to the dial and contrasts nicely with whichever dial colour choice you choose.

Powering the SeaBorne is the Sellita SW200-1 incabloc which is a reliable movement used by a number of well-known watch manufactures so I had no issues with this being part of the package. Winding was smooth and for the week I used this it ran well within the stated tolerances of +/-20 seconds a day.

So after spending some time with the AUDRIC SeaBorne what are my final thoughts? you have to applaud AUDRIC for making the effort to produce a diver with a very different and interesting dial! The baby blue sunburst colour I had was definitely fun but the bezel was the same colour and with the white writing and sapphire inlay made for difficult viewing in most lights. This particular colour combination I feel needs a few tweaks but then it will truly sing. Until then the other colours on offer seem to be more balanced and will probably be more wearable in most situations. The SeaBorne is big, it’s heavy but it does wear well for its size and has all the bracelet adjustments you’re likely to need. It’s a very compelling package if the size and style speak to you. A great first watch by AUDRIC which I’m sure will be refined further and become a well-loved piece by many.

Specifications

• Case: 316L stainless steel construction, screw-down case back. 500m water-resistant.
• Dimensions: 43mm * 51mm; 22mm lug width
• Bracelet: 22mm tapering to 20mm at the clasp. All stainless steel 316L construction. Divers clasp with micro-adjustment. Solid end links and screw construction.
• Crystal: Sapphire with 5 layer AR coating
• Bezel: Sapphire with BGW9 lume
• Dial: Sandwich Dial with BGW9 lume for hands and indices and C3 for minute markers. Rhodium-plated indices and sunburst pattern dial finish.
• Movement: Sellita SW200-1 Elabore Incabloc
• Price: pledges starting at $600 USD
• Audric site: https://www.audricwatches.com/

The post Audric SeaBorne Watch Review appeared first on 12&60.